SKU: m-pwm-2.0 Category:


PERFECT: The Morimoto Standalone wiring harnesses are the perfect solution for a headlight upgrade on vehicles with finicky headlight systems. Say goodbye to “bulb out” warning lamps and flickering caused by “can-bus” systems.

EFFECTIVE: Each canbus headlight harness has a built-in resistor pack to mimic the characteristics of a standard halogen bulb being plugged in to your stock harness, tricking the car into thinking nothing has changed. Check out this video showing just how simple these are to setup.

POWERFUL: The Morimoto Standalone wiring harness also features Japanese-made Rubycon 6800uF capacitors to help jump-start the ballasts and keep them running smoothly – using the power directly from the vehicle’s factory headlight circuit.

EURO-CENTRIC: Morimoto clearly developed specifically with the VW and Euro market in mind, these are known to work well on cars like the newer VW MK5 Golfs, Jettas, BMW E46, etc. The Standalone wiring harnesses DO NOT however work well on domestic cars/trucks like Chrysler/Dodge/Jeep. You guys need Morimoto’s “Mopar Spec” Stuff!

SIMPLE: With fewer connections to make compared to something like a full relay wire harness; even your mom could set this thing up it’s that easy. Input here, output there…done.

SOLD AS A PAIR: The standalone canbus headlight harnesses come as a pair, one for each side of the car. They are meant to be used as a substitute for a full relay harness, not in addition to one.

NOTE: Note that these will NOT work with vehicles that have DRL’s (Daytime Running Lamps) on their low beam circuit due to the pulsed low voltage current. For vehicles with DRLs on the high beam bulb, no problem.

Confidence: Order with confidence when purchasing through our website. The products offered have been thoroughly tested to make sure they meet our strict quality standards to ensure the best reliability and performance. We always provide honest feedback on products and helpful tips for any project due to our extensive experience with all makes and models. We offer competitive pricing, fast shipping, and the latest and greatest products from the top manufacturers. Contact us today with any questions; you won’t regret it!

2x Harness: Morimoto Standalone Can-bus 2.0
2x Input Adapters: Selected Fitment
Warranty: Two Years
Trigger Count: 1
HID Ballasts Count: 1
HID Ballasts Type: Sealed “9006” style female
Input: 2 or 3 Pin (Depending on Application)
High Beam: 2-pin Molex Female (H4,9007,H13 only)
Ballasts: 35W, 50W
Original Bulb: All sizes available
HID Systems: All 35w Systems
Bi-xenon Capable: With High Beam Splitters

Installation Guide: Click here!

Additional information

Harness Type

PWM Harness: Morimoto Standalone Canbus (9004/9007), PWM Harness: Morimoto Standalone Canbus (9005/9006), PWM Harness: Morimoto Standalone Canbus (H1/H3), PWM Harness: Morimoto Standalone Canbus (H11/H9/H8/880), PWM Harness: Morimoto Standalone Canbus (H13/9008), PWM Harness: Morimoto Standalone Canbus (H4/9003), PWM Harness: Morimoto Standalone Canbus (H7)


There are no reviews yet.

Be the first to review “CAN-BUS: MORIMOTO STANDALONE 2.0”

Your email address will not be published.